My 4hp Evinrude stays in gear and will not go into neutral after changing the gearbox lube oil. suggestions? - evinrude 4hp impeller replace
One of the screws in the fixed bug is the backbone of the shift fork. He rose from the set position, and if you screw in the ...... well, you the idea. It's a bit more complicated than putting it back into the position ...... You can buy a shop manual, but a good mechanic is that joy and laughter to be found, as the back and charged to do.
Monday, February 8, 2010
Evinrude 4hp Impeller Replace My 4hp Evinrude Stays In Gear And Will Not Go Into Neutral After Changing The Gearbox Lube Oil. Suggestions?
Subscribe to:
Post Comments (Atom)
2 comments:
two or three things we need to know first.
1. If this is the first change of lubrication equipment? For the first time on this engine?
2. In what year engine?
3. Is there a metal waste oil?
4. There was water on the oil?
5. Do you need a more detailed description of the symptoms. What measures are being taken, and what is the answer. I mean, you move the shift lever to neutral interest, but the engine still running? Or is the circuit as far as frozen can not move?
6. How to determine which is still ongoing? Is it because the propeller turns when the engine runs out of water? or something else?
To be familiar with the gas, kill switch, and pulled the starter rope. They all tabs to keep removing the engine continues to rotate 360 degrees backwards.
Post a Comment